top of page

1.HFT-500 printing and coating machine

    500/1000 bopp tape printing and coating machine

  • Can do printing, coating, and slitting all in one.

202002101859113330.png

1. Single or dual shaft unwinder.

2. Automatic tension control.

3. Gravure coating or semiflexo coating.

4. Drying tunnel with sectional temperature control and recirculation adjustment.

7. Steel idle rollers inside the drying hood friven by independent motor.

8. Inner stainless steel frame covers of the coating section.

9. Spreading roller driven by independent motor,positioning pneumatically.

10. S-type double cooling cylinders.

11. Automatic web guider for unwinding and rewinding.

12. On-line automatic detection of coating amount,with numeral display.

13. Drying sources:electricity,thermal oil,etc.

​

HFT-500 gum tape printing and coating machine for Dhaka customer

​

2.BOPP tape coating machine

202002101853143846.png

High speed BOPP tape coating machine

  • Application：suitable for BOPP packing tape.
    Technical Parameters:
    Effective width：1300mm（1600mm）
    Speed: 300M / min
    Unwinding diameter: 800mm
    coating uniformity: ± 1μ
    Rewinding uniformity: ± 2mm
    Total Power: 160HP (not include heating section)
    Oven length: 40M (according to customer requirements)
    Power: Three-phase 380V
    Machine size: 55 × 4.8 × 4.8M

  • ​

  • 1. The drying oven is equipped with the high-efficiency axial flow blower featuring the high drying efficiency and also designed with the multi-zone temperature control so as to accurately control the temperature at each zone of the oven in accordance with the processing requirements.
    2. Multi-stage tension control,the variable-frequency is employed and the multi-point synchronous controller is used to control synchronous operation of the unit.
    3. Unwinding and rewinding unit can automatically cut and join the tape without stopping the system to feed paper,thus having a higher efficiency..
    4. Using EPC alignment device is adopted so as to ensure that the edges of finished product are orderly and regular.
    5. Mayer-bar Coating type. (Depending on the requirements,there are a variety of coating options such as: knife type, transfer type, textured style, mayer-bar, dimpled type, etc.)
    6. There are many heating methods for choice,such as by steam,air heating stove,heat-conductive oil, electricity and etc.

     

     2 sets of gumtape coating machine for Bangladesh No.1 garment factory.

​

202002101854215736.png

 

 

3.Lamination coating machine

​

Application：suitable for sticker paper, PET tape,two-faced tapes,Silicon tapes,foam tapes and other electronic tapes.
Technical Parameters:
Glue type:Water&Oil
Effective width：1300mm（1600mm）
Speed: 100M / min
Unwinding diameter: 1000mm
Rewinding diameter:800mm
coating uniformity: ±0.002mm
Coating glue mode:Comma&Scraper of adjustment for control
Total Power: 70KW (not include heating section)
Oven length: 4M/section total 6 section; 24M (according to customer requirements)
Features:
1. The heating zone consists of IR oven and far-infrared-ray block ceramic heater.
2. Mayer-bar liner coating
3. Coater:Comma scrape mode,precision ±2μ
4. Operat ion control:PLC controller.

  •   

bottom of page